5009 Tools

5418-7830_OBJ_E.zip

System Requirements:

• Control System part numbers 8262-1141, 8262-1142, or 8262-1143
• CPU part number 5466-1347

Installation Instructions:

1.    Update the GAP application using the following procedure:

   • If unit has been configured: Download the current tunable settings file from the control. If unfamiliar with using Control Assistant, refer to 5009XT manual 35135V2, Appendix J for step-by-step instructions on “Retrieving Control Tunables” from the 5009XT.
   • If unfamiliar with using AppManager, refer to 5009XT manual 35135V2, Appendix G for step-by-step instructions.
   • Using AppManager, in the Control application view panel, Stop the application by selecting Control/Stop Application or the Maroon Square button on the right side Toolbar.
   • Under Control menu, select Transfer Application Files.
   • In the dialog box that opens browse to find the new GAP executable file named: 5418-7830_<Rev>.out
   • When transfer is complete, select the file and start the application by selecting Control/Start Application or the Blue Triangle button on the right side Toolbar.
   • If unit was configured: Upload the current tunable settings file (from step 1) from your PC into the control. Refer to 5009XT manual 35135V2, Appendix J, “Sending Control Tunables”.
   • Procedure complete. The application file is now in AutoStart, and the control will boot up normally after any power cycle.